This command requires privileged EXEC mode access. The IP address, subnet mask,
and default gateway settings are displayed here, as well as all other current running
con?¬?guration settings.
?– show interfaces: Displays statistics and status information of all the interfaces on the
switch. Both the switch trunks and the switch line ports are considered interfaces. The
Default
Gateway
Fa0/1 172.20.137.1
Starting a Switch 171
resulting output varies, depending on the network for which an interface has been
con?¬?gured. Usually this command is entered with the options type and slot/number,
where type allows values such as Ethernet and Fast Ethernet, and slot/number indicates
slot 0 and the port number on the selected interface (for example, E0/1).
Use the show version EXEC command to display the con?¬?guration of the system hardware
and the software version information. Example 2-1 shows the output for the show version
command.
Example 2-1 show version Command Output
Switch# sshhooww vveerrssiioonn
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(25)SEE2, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 28-Jul-06 11:57 by yenanh
Image text-base: 0x00003000, data-base: 0x00BB7944
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.
Pages:
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253