Enter the global parameters at the prompts, using the con?¬?guration values that were
determined for your router. The example shows the prompts for routing protocols as they
appear during setup.
If you enter yes at a prompt to indicate that you want to con?¬?gure a protocol, additional
subordinate prompts appear about that protocol. Example 4-4 illustrates this feature.
Continuing through the setup dialog, you are prompted for parameters for each installed
interface. Use the con?¬?guration values that were determined for the interface to enter the
proper parameters at the prompts. Example 4-5 illustrates the con?¬?guration of interface
FastEthernet 0/0.
Example 4-3 Default Settings and Global Parameters
Configuring global parameters:
Enter host name [Router]:RRoouutteerrAA
The enable secret is a password used to protect access to privileged EC and configuration
modes. This password, after entered, becomes encrypted in the configuration.
Enter enable secret: CCiissccoo11
The enable password is used when you do not specify an enable secret password, with some
older software versions, and some boot images.
Enter enable password: SSaannFFrraann33
The virtual terminal password is used to protect access to the router over a network
interface.
Pages:
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393