Figure 5-19 shows the wizard welcome window. Click Next to continue.
10.4.4.11
Fa0/0
DHCP Client
Fa0/1
Internet
Private
Addressing
10.4.4.0/24
Public
Addressing
171.69.58.0/24
370 Chapter 5: WAN Connections
Figure 5-19 WAN Wizard
If the ISP uses PPP over Ethernet (PPPoE), click the check box, and then click Next. These
options are shown in Figure 5-20.
Figure 5-20 PPPOE Con?¬?guration
Click the Dynamic (DHCP Client) radio button and enter the hostname as shown in
Figure 5-21.
Enabling the Internet Connection 371
Figure 5-21 DHCP Con?¬?guration
Check the Port Address Translation check box and choose the inside interface in the
drop-down list as shown in Figure 5-22.
Figure 5-22 PAT Con?¬?guration
When you are ?¬?nished, the wizard provides a summary of the con?¬?guration, as shown in
Figure 5-23.
372 Chapter 5: WAN Connections
Figure 5-23 Con?¬?guration Summary
Verifying the DHCP Client Configuration
You can use the Interfaces and Connections window in SDM to verify that the DHCP client
is obtaining an address from the DHCP server. This is shown in Figure 5-24.
Figure 5-24 Con?¬?guration Veri?¬?cation
NOTE The client IP address might not display in the window immediately, and you
might need to refresh the window.
Pages:
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515